-:-[Complete Guide For XBOX 360 GAMES XGD2/XGD3]-:-
I've been seeing lots of people asking lots of questions about most things in here so i decided to make this. I have burnt around 97 games now and found out these methods work 100% in most cases and want everyone to know.
All things needed:
Dvd + r dl 8.5gb discs.
DL burner.
Imgburn v2.5.6.0 (Newest as of now):
ABGX360 v1.0.5 (Newest as of now):
Burning:
If your downloaded ISO didn't come with a .dvd file here is how to make one:
For XGD2 open up ABGX360 and change these settings:
You want the region code to match your region so hit select.
Now load your ISO file and hit Launch.
It will patch and stealth your game for better online safety.
Green writing = good
Blue writing = good/fixed files
Yellow = bad/check what it says
It doesn't create a different ISO it overwrites original.
For XGD3 which is not yet supported by ABGX360, you will get an error/message saying it doesn't recognize it. When new version gets released ill update thread which will allow you to patch XGD3. For now download the 0800 ripped games which are said to be safe.
Right click on your desktop and then select text document.
Open the text document and copy and paste this into it:
LayerBreak=2133520
GAME.iso (text in red must be exact name of .iso game)
Now go to>save as>name it : exact name.dvd (make sure the extension is .dvd) and save it in the same place as your .iso.
Now right click on the .dvd file you just made and open with, notepad or txt editor.
Now lets change something, if your game is "XGD2" then change the layerbreak from "2133520" to "1913760".
Else if "XGD3" and you are not using an IHAS burner with CFW installed change the layerbreak from "2133520" to "2086912". This is for the 97% burns which fixes the black screen and kicked back to dash problem.
If you are using the IHAS burner with CFW then leave layerbreak as is (2133520).
Now your going to want to:
Open up ImgBurn 2.5.6.0 and go to Tools, then Settings, then Write: change the Layer Break to, Calculate Optimal if you put your layerbreak as "2133520" in .dvd file or for anything else just copy and paste the layerbreak you set into to, and then hit OK.
ImgBurn Settings:
Focus on these settings and make sure you have the priority set to HIGH.
Now select Write image file to disc, then locate your .dvd and select it , it will load the iso itself.
Then in the drop down menu on the left choose your correct drive. Then in the one on the right choose Write Speed of 2.4x. I use this slow speed to get better success rate and quality.
All things needed:
Dvd + r dl 8.5gb discs.
DL burner.
Imgburn v2.5.6.0 (Newest as of now):
ABGX360 v1.0.5 (Newest as of now):
Burning:
If your downloaded ISO didn't come with a .dvd file here is how to make one:
For XGD2 open up ABGX360 and change these settings:
You want the region code to match your region so hit select.
Now load your ISO file and hit Launch.
It will patch and stealth your game for better online safety.
Green writing = good
Blue writing = good/fixed files
Yellow = bad/check what it says
It doesn't create a different ISO it overwrites original.
For XGD3 which is not yet supported by ABGX360, you will get an error/message saying it doesn't recognize it. When new version gets released ill update thread which will allow you to patch XGD3. For now download the 0800 ripped games which are said to be safe.
Right click on your desktop and then select text document.
Open the text document and copy and paste this into it:
LayerBreak=2133520
GAME.iso (text in red must be exact name of .iso game)
Now go to>save as>name it : exact name.dvd (make sure the extension is .dvd) and save it in the same place as your .iso.
Now right click on the .dvd file you just made and open with, notepad or txt editor.
Now lets change something, if your game is "XGD2" then change the layerbreak from "2133520" to "1913760".
Else if "XGD3" and you are not using an IHAS burner with CFW installed change the layerbreak from "2133520" to "2086912". This is for the 97% burns which fixes the black screen and kicked back to dash problem.
If you are using the IHAS burner with CFW then leave layerbreak as is (2133520).
Now your going to want to:
Open up ImgBurn 2.5.6.0 and go to Tools, then Settings, then Write: change the Layer Break to, Calculate Optimal if you put your layerbreak as "2133520" in .dvd file or for anything else just copy and paste the layerbreak you set into to, and then hit OK.
ImgBurn Settings:
Focus on these settings and make sure you have the priority set to HIGH.
Now select Write image file to disc, then locate your .dvd and select it , it will load the iso itself.
Then in the drop down menu on the left choose your correct drive. Then in the one on the right choose Write Speed of 2.4x. I use this slow speed to get better success rate and quality.
No comments:
Post a Comment